How to Use

1. Clean surface of heavy soil, grime, grease or wax build-up.

2. Spray or wipe on with a soft, non-absorbent cloth, and spread evenly.

3. Allow to dry (just a few minutes allows complete penetration of the surface) then wipe off with a clean dry cotton cloth.

For vehicles, apply two coats, wipe down between coats, then buff with a low speed buffer, or buff by hand with a chamois cloth. Apply sparingly. A little goes a long way, and repeated applications increase protection. A pint will polish 4 cars!

On boats, ATVs or other vehicles with fiberglass or plastic bodies, first use NANOPRIME, available from your NANOTECH dealer.

WARNING: Do not use this product on your floor. Floors may become very slippery and dangerous to walk on.